3992773 Potter PAD 200-PHCD Photo/Heat/CO Detector

Features

• Photoelectric Smoke Detection compliant with UL 268 7th Edition
• Carbon Monoxide (CO) detection compliant with UL 2075
• Heat Detection compliant with UL 268 and UL 521 7th Edition
• Walk Test mode allows for fast easy validation of CO sensor operation
• Low profile, less than 2 inches with the base
• Wide selectable sensitivity range of 1.0 to 3.5%/foot
• Temperature range of 32° F to 115° F
• Selectable Rate of Rise and/or fixed heat detector
• Fixed temperature range of 135° F to 185° F
• Sensor communicates sensitivity to control panel
• UL listed smoke calibration and sensitivity
• Optional locking tab to prevent unwanted removal
• Simple DIP switch address setting, no programming tool required
• LED alarm indicator
• Product includes a 5 year warranty
• UUKL Listed for Smoke Control

Description

The PAD200-PCHD is a listed Analog Addressable photoelectric smoke sensor, rate of rise and/or fixed temperature heat sensor and carbon monoxide (CO) sensor compatible with fire alarm control panels that utilize the Potter Addressable Device (PAD) protocol. The CO sensing portion utilizes a proven electrochemical sensor for accurate detection of CO gas for life safety applications. The photoelectric sensor complies with UL 268 7th edition enhanced smoke sensitivity tests. It has a wide sensitivity range of 1.0 to 3.5% per foot, and features drift compensation with built in dirty detector warning.

The heat sensing portion utilizes a proven thermistor for accurate and reliable heat detection. The sensor and the control panel communicate over a proven and robust digital communication path and the system analyzes the information at the particular device. The total polling speed is less than five (5) seconds, well under the UL requirements. The sensor is compatible with any of the PAD sensor bases and simply twists on. The PAD200-PCHD is addressed using DIP switches in the rear of the sensor and can be easily programmed in the field without special tools.

Technical Specifications

• Operating Voltage - 24 VDC
• Detector Current Draw - 300 μA
• Alarm indicator - 1 LED
• Alarm set-point range - 1.1-3.5 %/ft. (3.6-11%/m) / 135° to 174°F (57° to 79° C)
• Rate of Rise Detection (Selectable Option) - 15°F/min. (8.3°C/min.)
• Installation temperature range - 32° to 115° F / 0° to 46° C
• Operating relative humidity range - 0% to 93% (non-condensing)
• Start-up time - 1 second
• Maximum number of addresses per loop - 127
• Maximum number of lighted indicators in alarm per loop - 30
• Color - Eggshell White
• Weight (without base) - 118.5 g (4.2 oz)
• Dimensions (without base) - Height: 1.94 in (49 mm) Diameter: 3.93 in. (100 mm)

3992773 Specifications PDF