NSW2020-24T1GT1GC-LPOE-IN Uniview UNV Ethernet 24 Port 225W Low Power PoE Switch

Specifications

• Model - NSW2020-24T1GT1GC-LPOE-IN
• Ports - 24x100Mbps PoE ports (RJ45) + 1x1000Mbps Gigaethernet ports +1x1000Mbps Combo ports
• Standards - IEEE802.3,IEEE802.3u,IEEE802.3z,IEEE802.3ab,IEEE802.3x,IEEE802.3af,IEEE802.3at,IEEE802.3az
• Switching capacity - 8.8Gbps
• Forwarding performance - 6.55Mpps
• Packet Buffer - 4M bit
• MAC - 16K
• Dimensions (WxDxH) - 440*195*44mm
• Weight - 2.15KG
• Power supply - AC: 100-240V, 50/60Hz
• PoE - 802.3at/af （4/5+，7/8-）
• Max. PoE Power - Max capacity:225W Max capacity for single port: 30W
• Prior Ports - 1~8
• Cooling Fans - 1
• Operating temperature - 32°F-104°F (0°C-40°C)
• Operating humidity - 10%～90% (noncondensing)
• Storage humidity - 5%～90% (noncondensing)

Indicator

• POWER - Steady on: AC input is normal Off: No AC input
• POE - Off: No PoE power supply, Steady on: PoE power supply is normal
• PoE-MAX - off ：The POE power supply power of the whole machine is less than 80% of the specification; Steady on : The POE power supply power of the whole machine is greater than 85% of the specification
• LINK/ACT： - Off: No link, Steady on: Linked, Flashing: Transmitting data
• Working Mode
  • Default(Normal mode) - All ports can communicate with each other
  • VLAN(Secure mode) - Downlink ports can communicate only with uplink ports. Enabling PD keepalive function, the switch will restart the IPC via PoE power when the IPC sends no message in a period of time
  • EXTEND(Surveillance mode) - Transmission distance up to 250 meters. Downlink ports can communicate only with uplink ports

NSW2020-24T1GT1GC-LPOE-IN Specifications PDF